Smart Home Supplier

Category: Arduino


Showing 1–9 of 56 results

  • Arduino Nano


    The Arduino Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino ‘Duemilanove’, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.   Features: …

    Arduino NanoRead More

    Read more
  • 18650 Battery Holder – Single


    18650 Battery Holder – Single   Single holder for 18650 3.7V Battery in Single configuration inc. Wires. Commonly used in conjunction with a charging circuit/solar source to power off grid Arduino/Raspberry Pi projects. Features: Fits standard 1860 Battery with button top 10cm wires Specifications: Material: PBT RoHS Compliant Flammability: UL 94V-0  

    Add to basket
  • D1 MINI Development Board


    D1 MINI Development Board (V3.0)   The D1 Mini is a breadboard-compatible WiFi development board based on the ESP8266. This board is compatible with the Arduino IDE and with NodeMCU. All of the I/O pins have interrupt, PWM, I2C, and one-wire capability, except for pin D0. The board comes with three different sets of header pins: long-pin female …

    D1 MINI Development BoardRead More

    Add to basket
  • Triple Base Shield for D1 MINI


    Triple Base Shield for D1 MINI   The WEMOS D1 MINI 3×1 Triple Base Board Shield is designed to allow you to add different boards of the D1 MINI family side-by-side instead of on top of one another. This is especially useful when you have multiple shields that are not suited for stacking together such …

    Triple Base Shield for D1 MINIRead More

    Add to basket
  • OLED Shield for D1 MINI


    OLED Shield for D1 MINI The D1 Mini OLED shield is a tiny 0.66″ 64 x 48 pixel OLED display. Using OLED display technology means that not only is the display very bright and clear with a high contrast ratio but has a much lower power consumption when compared to other display technologies such as …

    OLED Shield for D1 MINIRead More

    Add to basket
  • CC1101 Wireless Module 868MHZ


    The C1101 M115 module is a multi channel transceiver (receive AND transmit) operating at 868MHz and supports a variety of modulations, including FSK, GFSK, ASK, OOK and MSK modulations. It has a configurable data rate of 1.2k up to 500kbps and has independent 64bit RX and TX data FIFOs (first in, first out) processing queues. …

    CC1101 Wireless Module 868MHZRead More

    Add to basket
  • USB to TTL UART Converter Module CH340G


    Essential for any workbench or project box this USB to TTL UART allows the programming and debugging of micro controllers and other associated programmable electronics It’s a small USB to TTL serial tool, using the CH340G chip. You can use it to connect serial devices via your PC/Laptop’s USB ports   Features: Provides a virtual …

    USB to TTL UART Converter Module CH340GRead More

    Add to basket
  • UNO R3


      The UNO is a development board which features the ATmega328P microcontroller (MCU). It is a perfect introduction to electronics and coding. The UNO also demonstrates the basics on sensors and actuators. The UNO is the ideal, entry-level board for those who are new to developing on the Arduino platform. It’s a popular board as …

    UNO R3Read More

    Add to basket
  • SX1278 LoRa Transmitter Module


    SX1278 LoRa Transmitter Module – RA-02 Spread Spectrum Wireless Module   The SX1278 transceivers feature the LoRa (Long Range) modem that provides ultra-long range spread spectrum communication and high interference immunity whilst minimizing current consumption. Utilising LoRa modulation, the SX1278 module can achieve a sensitivity of over -148dBm using a low cost crystal and clever internal design. …

    SX1278 LoRa Transmitter ModuleRead More

    Read more