Smart Home Supplier

  • Capacitive Soil Moisture Sensor
  • Capacitive Soil Moisture Sensor
  • Capacitive Soil Moisture Sensor

Capacitive Soil Moisture Sensor

£3.99

In stock

Traditional soil moisture sensors are prone to corrosion and only offer a limited lifespan due to the contact between the measurement element and the soil content itself. This capacitive soil moisture sensor features no exposed plating and uses capacitive sensing to detect soil moisture.

The sensor has a built-in voltage regulator that supports 3.3V, meaning it can work with a 3.3V development board as well as 5V.


Features:

  • Analogue Sensor
  • PH2.54 3-pin Interface
  • Operates at either 3.3V or 5V
  • Outputs sensor readings at <3VDC
  • Sealed in anti-static bag


Specifications:

  • Operating voltage: 3.3-5 VDC
  • Output voltage: 0-3.0 VDC
  • Dimensions: 98mm x 23mm x 10mm
Weight 45 g
Dimensions 9 × 2.5 × 1 cm
Soldered

Header pins soldered on

Not Soldered

Header pins not soldered onto board

You may also like…

  • MQ-135 Air Quality Sensor

    £4.85

    MQ-135 Air Quality Sensor   This is a commonly used air quality sensor. The gas sensing material used in this sensor is tin oxide (SnO2) with low conductivity in clean air. When there is a polluting gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of …

    MQ-135 Air Quality SensorRead More

    Add to basket
  • Laser Sensor Module

    £2.79

    Laser Sensor Module  This laser receiver sensor module uses a non-modulated laser receiver to detect the laser signal. It is best used indoors where there is no light, sunlight or other sources of light which will interfere with the sensor, recommended for use in dark environments. Specifications: Voltage : 5v Output high level when receiving …

    Laser Sensor ModuleRead More

    Add to basket
  • BMP280 3.3V Atmospheric Sensor Module

    £2.57

    BMP280 This precision sensor from Bosch, is soldered onto a PCB and includes the dupont connectors separately. Features: Pressure, temperature and humidity measurement It uses both I2C and SPI (supports 3-, 4-wire SPI) interface Specifications: Supply Voltage: 1.8 – 5V DC Interface: I2C (up to 3.4MHz), SPI (up to 10 MHz) Operational Range: Temperature: -40 …

    BMP280 3.3V Atmospheric Sensor ModuleRead More

    Add to basket
  • Small Enclosed Piezo with Wires

    £1.20

    Small Enclosed Piezo with Wires   This small (14mm diameter) piezo element is nicely enclosed so you can attach easily. Piezo elements convert vibration to voltage or voltage to vibration. That means you can use this as a buzzer for making beeps, tones and alerts AND you can use it as a sensor, to detect …

    Small Enclosed Piezo with WiresRead More

    Add to basket