RC-522 RFID Reader/Writer
£4.99
In stock
This RFID module enables the reading and writing of RFID tags and is suitable for use in both single-board computers, such as Raspberry Pi, and single-board microcontrollers such as Arduino and ESP8266. This packages includes both an RFID tag, RFID card and header pins (unsoldered).
Features:
- Operating Frequency: 13.56 MHz
- Supported Card Types: S50, S70, Ultralight, Pro, Desfire
- Max Data transfer rate: 10 Mbit / s
- Sealed in anti-static bag
Specifications:
- Operating voltage: 3.3 VDC
- Current: 13-26mA
- Idling Current: 10-13mA
- Sleep Current: <80uA
- Peak Current: <30mA
- Dimensions: 60mm x 40mm x 10mm
| Weight | 50 g |
|---|---|
| Dimensions | 6 × 4 × 1 cm |
| Soldered | Header pins soldered on |
| Not Soldered | Header pins not soldered onto board |
You may also like…
-
AHT10 Temperature & Humidity Sensor
£3.93Add to basketAHT10 Temperature & Humidity Sensor The AHT10, is a new generation of temperature and humidity sensor. The sensor outputs a calibrated digital signal in standard I2C format. The AHT10 is equipped with a newly designed ASIC-specific chip, an improved MEMS semiconductor capacitive humidity sensing element and a standard on-chip temperature sensing element. Features: Module size: …
-
Laser Sensor Module
£2.79Add to basketLaser Sensor Module This laser receiver sensor module uses a non-modulated laser receiver to detect the laser signal. It is best used indoors where there is no light, sunlight or other sources of light which will interfere with the sensor, recommended for use in dark environments. Specifications: Voltage : 5v Output high level when receiving …
-
Small Enclosed Piezo with Wires
£1.20Add to basketSmall Enclosed Piezo with Wires This small (14mm diameter) piezo element is nicely enclosed so you can attach easily. Piezo elements convert vibration to voltage or voltage to vibration. That means you can use this as a buzzer for making beeps, tones and alerts AND you can use it as a sensor, to detect …
-
MQ-135 Air Quality Sensor
£4.85Add to basketMQ-135 Air Quality Sensor This is a commonly used air quality sensor. The gas sensing material used in this sensor is tin oxide (SnO2) with low conductivity in clean air. When there is a polluting gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of …
Related products
-
SONOFF DW2-RF Door & Window Sensor
£6.99Add to basketDoors and windows as the entrances and exits are the weakest points of your home. An unsecured door or window is like an obvious “WELCOME” sign, to a burglar, so door/window sensors are also known as “entry sensor”. As one of the most popular home security devices, DW2-RF wireless door/window sensor is smart enough to …
-
AA/14500 Battery Holder
£1.20 – £3.25Select optionsBattery holder for common AA/R6/UM-3/HP7 or Li-Ion 14500 batteries in multiple configurations all including 12cm connection wires. Commonly used in conjunction with a charging circuit/solar source to power off grid Arduino/Raspberry Pi projects, such as a 5V Solar Panel – 1.25W 250mA coupled with a Li-ion 18650 Step Up Battery Charger Board should keep your …
-
18650 Battery Holder
£2.00 – £2.75Select optionsBattery holder for 18650 3.7V Batteries in multiple configurations all including 10cm connection wires. Commonly used in conjunction with a charging circuit/solar source to power off grid Arduino/Raspberry Pi projects, such as a 5V Solar Panel – 1.25W 250mA coupled with a Li-ion 18650 Step Up Battery Charger Board Features: Fits standard 1860 Battery with …
-
Maplin USB Host Shield for Arduino
£6.50Read moreEnd of Life Product – We do not have an estimate as to when we will be getting this product in stock again as the manufacturer has stopped manufacturing the product. USB Host Shield contains all of the digital logic and analogue circuitry necessary to implement a full-speed USB peripheral/host controller with your Arduino. …
