Smart Home Supplier

  • Olimex ESP32-POE-ISO
  • Olimex ESP32-POE-ISO
  • ESP32-POE-ISO-1
  • ESP32-POE-ISO-3
  • ESP32-POE-ISO-4

Olimex ESP32-POE-ISO

£31.85

Out of stock

Email when stock available

Olimex – ESP32-POE-ISO (Rev. D)

 

All in one module! ESP32 with Wi-Fi, Bluetooth, Ethernet 100Mbps, PoE + Isolation, LiPo charger, USB and microSD… The Olimex ESP32-POE-ISO really does have it all.

ESP32-PoE is an IoT WIFI/BLE/Ethernet development board with Power-Over-Ethernet feature. The PoE is handled by Si3402-B chip that is IEEE 802.3-compliant, including pre-standard (legacy) PoE support. The PoE powering requires at least 37V DC to operate successfully. The board takes power from the Ethernet cable and can be expanded with sensors and actuators. Perfect solution for Internet-of-Things projects.

 

Specifications:

  • Micocontroller: ESP32
  • Frequency: 240MHz
  • Flash Memory: 4MB
  • RAM: 320KB
  • Rev. D (Manufactured October 2020)
  • ESP32-POE-ISO has 3000VDC galvanic insulation from Ethernet power.
  • ESP32-WROOM-32 WiFi/BLE module
  • Ethernet 100Mb interface with IEEE 802.3 PoE support
  • LiPo battery charger
  • LiPo battery connector
  • UEXT connector
  • User button
  • Reset button
  • Micro USB with programmer for ESP32 programming
  • MicroSD card connector
  • Two extension connectors 0.1″ step spaced at 1″
  • PCB dimensions: (75 x 28)mm ~ (3 x 1)”
  • Low power design – 200uA consumption in deep sleep
  • Battery level monitor pin on ADC
  • External power supply detection pin on ADC

 

Other Notes:

  • RoHS Compliant
  • Olimex POE-ISO version protects your computer and board from accidental short circuit by isolating the two incoming power sources.
  • Packaged in original manufacturer’s box
Weight 42 g
Dimensions 13 × 10 × 3 cm
Soldered

Header pins soldered on

Not Soldered

Header pins not soldered onto board

SKU: esp32-poe-iso Categories: , , , Tags: , , , , ,

You may also like…

  • UNO R3

    £5.80

      The UNO is a development board which features the ATmega328P microcontroller (MCU). It is a perfect introduction to electronics and coding. The UNO also demonstrates the basics on sensors and actuators. The UNO is the ideal, entry-level board for those who are new to developing on the Arduino platform. It’s a popular board as …

    UNO R3Read More

    Add to basket
  • ESP32 Camera Development Board

    £7.99

    ESP32-CAM is a low-cost ESP32-based development board with onboard camera, small in size. It is an ideal solution for IoT application, prototypes constructions and DIY projects. The board integrates WiFi, traditional Bluetooth and low power BLE , with 2 high-performance 32-bit LX6 CPUs. It adopts 7-stage pipeline architecture, on-chip sensor, Hall sensor, temperature sensor and …

    ESP32 Camera Development BoardRead More

    Add to basket
  • ESP-12F WIFI Development Board

    £5.50

    The core processor of the ESP-F module uses the cost-effective chip ESP8266EX. The chip integrates the industry-leading Tensilica’s L106 ultra-low-power 32-bit micro-MCU in a smaller package with 16-bit Lite mode, supporting 80 MHz and 160 MHz at the main frequency and supporting RTOS. The ESP8266EX has a full Wi-Fi network function that can be used …

    ESP-12F WIFI Development BoardRead More

    Add to basket
  • D1 MINI Development Board

    £4.00

    D1 MINI Development Board (V3.0)   The D1 Mini is a breadboard-compatible WiFi development board based on the ESP8266. This board is compatible with the Arduino IDE and with NodeMCU. All of the I/O pins have interrupt, PWM, I2C, and one-wire capability, except for pin D0. The board comes with three different sets of header pins: long-pin female …

    D1 MINI Development BoardRead More

    Add to basket