Smart Home Supplier

  • F37 Rain Sensor
  • s-l1600 (2)
  • s-l1600 (3)
  • s-l1600
  • s-l1600 (4)

Raindrop/Water Detection Sensor

£2.50

Only 1 left in stock

Raindrop/Water Detection Sensor

This raindrop/water sensor can be used for a variety of monitoring, from monitoring for raindrops in a DIY weather station, to detecting leaks from pipes or low water levels in an irrigation system. Water molecules present on the detection area produce resistance, and this resistance is translated into both digital and analog output signals with a potentiometer sensitivity for adjustment.

Features:

  • Potentiometer Sensitivity Adjustment
  • Digital and Analog outputs
  • VCC: Power Positive (3-5V)
  • GND: Power Negative
  • DO: TTL switching signal output.
  • AO: Analog output.

 

Weight 30 g
Dimensions 12 × 8 × 1 cm
Soldered

Header pins soldered on

Not Soldered

Header pins not soldered onto board

SKU: f37-rain-sensor Categories: , Tags: , , , ,

You may also like…

  • Li-ion 18650 Step Up Battery Charger Board

    £1.99

    Li-ion 18650 Step Up Battery Charger Board   This module is a small single cell lithium battery charging module which also includes a 1A step-up (boost) converter for powering a large range of applications. The module will charge most types of single cell (3.7) LiPo batteries from either 4 to 7.5V power supply input, or …

    Li-ion 18650 Step Up Battery Charger BoardRead More

    Add to basket
  • D1 MINI Development Board

    £4.00

    D1 MINI Development Board (V3.0)   The D1 Mini is a breadboard-compatible WiFi development board based on the ESP8266. This board is compatible with the Arduino IDE and with NodeMCU. All of the I/O pins have interrupt, PWM, I2C, and one-wire capability, except for pin D0. The board comes with three different sets of header pins: long-pin female …

    D1 MINI Development BoardRead More

    Add to basket
  • KY-008 650nm 5V Laser Module

    £1.80

    This 100mW laser module emits a small intense focused beam of visible red light. When used with an Arduino like the D1 MINI Development Board and photo resistor module it can perform basic remote sensing of objects in the lasers path. Typical Usage would be for a laser trip wire to activate a security alarm, or …

    KY-008 650nm 5V Laser ModuleRead More

    Add to basket
  • MQ-135 Air Quality Sensor

    £4.85

    MQ-135 Air Quality Sensor   This is a commonly used air quality sensor. The gas sensing material used in this sensor is tin oxide (SnO2) with low conductivity in clean air. When there is a polluting gas in the environment where the sensor is located, the conductivity of the sensor increases as the concentration of …

    MQ-135 Air Quality SensorRead More

    Add to basket