Vibration Sensor Module
£1.50
In stock
Useful for a variety of vibration based triggering such as home automation for large appliances (washing machine/dishwasher cycles) and anti-theft systems (car alarm, house door/window alarm). Only requiring low power this normally open vibration sensor has an adjustable digital output with 2 LED indicator lights (power/activation).
Specifications:
- Operating Voltage: 3.3V ~ 5.5V
- Operating Current: 15mA@5VDC
- Starting Position: Normally Open
- Outputs: Digital Pin and Analog Output
- Adjustments: Potentiometer
- Sensor: SW-18010P
- Dimensions (LxWxH): 45mm x 15mm x 10mm.
Other notes:
- Sealed in anti-static bag.
| Weight | 10 g |
|---|---|
| Dimensions | 4.5 × 1.5 × 1 cm |
| Soldered | Header pins soldered on |
| Not Soldered | Header pins not soldered onto board |
You may also like…
-
D1 MINI Development Board
£4.00Add to basketD1 MINI Development Board (V3.0) The D1 Mini is a breadboard-compatible WiFi development board based on the ESP8266. This board is compatible with the Arduino IDE and with NodeMCU. All of the I/O pins have interrupt, PWM, I2C, and one-wire capability, except for pin D0. The board comes with three different sets of header pins: long-pin female …
-
5V Relay Module with Optocoupler Isolation
£2.50 – £5.50Select optionsThese 5v Relay module boards feature genuine Tongling or Songle electromagnetic relays, providing normally open (NO) or normally closed (NC) states and can handle a maximum load of: AC 250V/10A or DC 30V/10A. Features: SMD optocoupler isolation design Stable performance; trigger current 5mA Module voltage: 5V Modules can individually be set high or low and …
-
Laser Sensor Module
£2.79Add to basketLaser Sensor Module This laser receiver sensor module uses a non-modulated laser receiver to detect the laser signal. It is best used indoors where there is no light, sunlight or other sources of light which will interfere with the sensor, recommended for use in dark environments. Specifications: Voltage : 5v Output high level when receiving …
-
Olimex ESP32-POE-ISO
£31.85Read moreOlimex – ESP32-POE-ISO (Rev. D) All in one module! ESP32 with Wi-Fi, Bluetooth, Ethernet 100Mbps, PoE + Isolation, LiPo charger, USB and microSD… The Olimex ESP32-POE-ISO really does have it all. ESP32-PoE is an IoT WIFI/BLE/Ethernet development board with Power-Over-Ethernet feature. The PoE is handled by Si3402-B chip that is IEEE 802.3-compliant, including pre-standard …
Related products
-
DC Power Shield for D1 MINI
£3.25Add to basketDC Power Shield for D1 MINI (V1.1.0) Powering the D1 Mini can easily be done with the DC Power Shield. This unit can handle up to 24 Volts which will easily handle even larger motors you have in mind to control. The barrel jack connection makes it perfect for a 9 Volt battery connection as …
-
Maplin pcDuino Development Board v2
£14.99Read moreThe Maplin pcDuino v2 is a high performance, cost effective mini PC platform that runs PC like OS such as Ubuntu. It outputs its screen to HDMI enabled TV or monitor via the built in HDMI interface. It is specially targeted for the fast growing demands from the open source community. The platform could run …
-
DC-DC Step Down Power Supply Module
£1.95Add to basketThis handy and versatile DC to DC step-down adjustable buck power supply module is based on the popular LM2596 switching regulator. Simply apply an input voltage between 3 – 40V DC and use the onboard adjustable potentiometer to output a DC voltage between 1.5 and 35V, a simple must have for any workbench or project …
-
Mechanical End Stop Module
£3.89Add to basketMechanical End Stop Module This module is designed to add a mechanical lever switch to your project. This is a lever switch, which triggers when a sufficient force is applied to the lever. On doing so the output will read LOW. Features: Keyestudio EASY-plug RJ11 connector M3 mounting hole allowing for its easy attachment …
